Final Quiz – Fire Alarm Systems | HOT | Master

What does FACU stand for?

What Reference Manual is required to know if a fire alarm system is needed?

What is the Reference Manual required for fire alarm wiring?

What is the Reference Manual containing installation requirements, performance, and testing?

What are the two different types of Smoke Detectors?

The Supervisory Switch has to generate a signal within __________ turns.

What are two different types of Pull Stations?

What Chapter in NFPA 72 2019 refers to input devices for Pull Stations?

According to NFPA 72 2019, the battery must supply __________ hours standby time and __________ minutes in alarm.

When installing a Horn, code requires the sound to be __________ above the average ambient sound of the area being covered.

What Chapter in NFPA 72 2019 pertains to Inspection, Testing, and Maintenance?

Who is responsible for properly maintaining and keeping the System Fire Alarm Records?

What percentage of devices are tested annually for the Fire Alarm Inspection?

According to NFPA 72 2019, what Chapter refers to installing a Documentation Box?

The Written Test Plan for technicians was added to the 2013 edition of NFPA 72.

As per table 14.4.3.2., in NFPA 72 2019, the Battery Charger Test is to be conducted?

As per NFPA 72 2019, a Pull Station has to be tested annually and visually inspected twice a year.

If the manufacturer requires a Device to be tested more than what the code states, this will supersede NFPA 72.

During an Annual Inspection, you must note the start time and date as well as the __________ time and date on the inspection report.

The final step on the Annual Inspection report is very important. You must have the __________ sign and verify that the inspection has been completed.

What does the acronym ECS stand for?

What new Chapter in NFPA 72 2010 will focus on Emergency Communication Systems?

What are the most common Fire Alarm Circuit Pathways?

What does the Class B Conventional Circuit require at the end of the circuit?

What is the height requirement for the operable part of a pull station device from the finished floor?

Pull Stations shall be located within _________ of an exit on each floor.

What Chapter in NFPA 72 2019 edition covers private and public operating modes?

The Standard for the Installation of Carbon Monoxide Detection and Warning Equipment is in ___________.

According to NFPA 72 2019, what Chapter would you find 520 HZ Sounders used on fire alarm systems?

When doing the Battery Calculations for Your Fire Alarm System, you must add __________ to compensate for the battery aging over several years.